Sony HVL-F60RM Operating Instructions Manual page 24

Wireless flash
photography (with the
receiver unit)
You can specify another flash unit
attached to the camera or the
radio wireless commander as the
commander unit, and then use
the commander unit to trigger the
flash operation of this flash unit
placed away from the camera.


Commander unit (CMD)
 HVL-F60RM
As the commander unit, you
can use this flash unit or a radio
wireless commander.
1
Select wireless (WL) flash
mode on the camera.
• For selecting the flash mode
on the camera, refer to
the operating instructions
supplied with the camera.
2
Press the WL button on this
flash unit and select [RCV].
3
Press the Fn button and
specify the wireless group
for this flash unit.
• For details, refer to the Help
Guide (page 2).
GB
24
4
Attach the mini-stand to this
flash unit.
• For details of attaching the
5
Attach another flash
unit specified as [CMD]
(commander unit) to the
camera.
• Make sure that [CMD] is

6
Place the camera and this
flash unit.
7
Make sure that the flash unit
on the camera (commander
unit) and this flash unit are
wirelessly connected and
ready to fire.
• Wirelessly connected: The
• Ready to fire:
mini-stand, refer to the Help
Guide.
displayed on the LCD panel of
the commander unit.
LINK lamp is lit in green.
– The TEST button on the
back of the unit is lit in
orange.
– While [ON] is selected for
[WL READY LAMP] on the
MENU settings screen, the
AF illuminator on the front
of the receiver unit blinks.