Care For The Machine; Replacing The Light Bulb; Cleaning The Machine; Clean The Feed Dogs - Kenmore 385. 12708 Owner's Manual

SECTION 5. CARE FOR THE MACHINE
Replacing the Light Bulb Cleaning the Machine
T T
1. Unplug the machine and open the
face cover.
CAUTION! The light bulb could be
HOT. Protect your
fingers when you handle
it.
2.
3.
Push the bulb up and turn the
bulb counter*clockwise to remove
it,
Put the new bulb in by pushing it
up and turning it clockwise.
To insure that your machine operates at its best, you need to keep the essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread
is caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
Clean the Feed Dogs
Follow these directions:
1,
Unplug the machine. Remove
presser foot and needte.
Using a screw driver, remove
needle plate.
2. Use a lint brush to clean the feed 3. Replace needle plate.
dogs.
38