Prepare The Bobbin; To Remove; Wind The Bobbin - Kenmore 385. 1254180 Owner's Manual

Prepare the Bobbin
o To Remove the Bobbin Case from the Nlachine
Remove the extension table from
the machine by pulling it to the
left. Open the shuttle cover by
purling down the embossed part on
the left rode of the cover.
Ra+se needle to its highest pos+tlon
bv rotat+ng hand wheel toward you.
To remove bobb+n case from shut-
tle, pull open latch of bobbin case.
Pull bobbin case straight out of
shuttle.
o Wind the Bobbin
Release clutch by turning the
ctutch knob mmde the hand wheet
toward you,
!3