What’s Included ............6 T19 Diagram ............7 Before Using Your Conbrov T19 Camera ....8-11 How to Use Your Conbrov T19 Camera ....12-14 1. Turn on the Camera /Record a Video ....12 2.How to Turn On/Off Motion Detection Recording... 13 3.
Part 1 Before First Use Charging the camera Before the first use, charge the camera via your PC or USB charger (Power adapter should be no more than 5V/1A). Formatting the microSD Before the first use, format the microSD to FAT32 format. And insert the microSD before use.
Page 4
Part 1 Before First Use Resetting the camera If the camera malfunctions for any reason, reset it with the included pin. A small paperclip can also be used.
Part 2 Quick Guide A.Install the microSD Card B.Turn on/Record a video ON lights flash blue 3 times and then turn off , the camera is in video recording standby mode. C.Save a Video/Turn off D.Play the Video OFF lights flash USB2.0 alternating red and blue and then turn...
Safety Precautions • Read this instruction manual carefully before using the camera. It contains important information for your safety as well as operating and maintenance instructions. • F ollow all safety precautions in order to prevent damage due to improper use of the camera. •...
Warning on Invasion of Privacy The camera should be used for legal purpose only. Follow the laws of your country.Recording and circulating an image of an individual may constitute an infringement of their privacy for which you could be liable. Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium.
Before Using Your Conbrov T19 Camera 1. Charging your camera Steady yellow Charging Fully charged Low power Flashing blue and red (1)Charge the camera via your PC or USB charger 5V/1A. (2)Connect the supplied USB cable to the Micro USB port and a suitable USB port on your PC or a USB charger (separate charger not included).
Page 11
Before Using Your Conbrov T19 Camera Caution! Format the microSD before use. Doing this, however, will remove all data from the card. Make sure to back up any data before formatting. (1)Only support a Class 10 microSD with at least 8GB capacity for recording.
Page 12
Before Using Your Conbrov T19 Camera 3. Setting the day and time Insert the micro SD card into the card reader and connect the card reader to your PC. After a few seconds the micro SD card will show as a removable disk.
Page 13
Before Using Your Conbrov T19 Camera Note: If you cannot find the file SETTIME.TXT after opening the microSD on the computer, please record a video clip to activate the card and set the date and time again. The date and time will remain accurate unless the...
How to Use Your Conbrov T19 Camera 1. Turn On the Camera /Record a Video (1) Press and hold the for 2 seconds to switch the camera on. The LED will flash BLUE 3 time and then turn off , which indicates that it is in video recording standby mode.
How to Use Your Conbrov T19 Camera 2.How to Tun On/Off Motion Detection Recording (1) Press and hold the for 2 seconds to switch the camera into Motion Detection Mode. The LED will flash BLUE 1 time and turn off , then flashes RED 3 times and the RED light will stay on, which indicates that it is in Motion Detection Mode.
4. How to Play a Video Connect the T19 camera to computer, press and hold the Power Button for more than 2 seconds, the LED will flash red and the blue light will stay on. Or take out the microSD, insert it into the card reader (included), then connect the card reader to computer.
Other Tips How to Reset the Camera Use the supplied pin or similar tool (like a paperclip) to reset your camera in case of a malfunction. Press and hold the Reset Button for several seconds to reset the camera to standard factory settings.
LED Status Operation LED status indication Steady yellow and goes off Charging once fully charged. LED flashes blue 3 times and Turn on/video turns off. recording LED flashes alternately red Turn off and blue and then go off. LED flashes blue and turns off, Motion detection then flashes red 3 times.
Technical Specifications Adapter D C /5V Battery capacity 8 00 mAh Camera angle 6 0 ° Night vision range Motion detection standby time 1 year Day recording power consumption 1 30mA Day continuous recording time 5 hours Night recording power consumption 4 00mA Night continuous recording time 2 hours...
FAQs 1. Q: What should I do if all function buttons cannot work? A: Reset the camera. 2. Q: Why the camera cannot be read when connected to A: Check the USB port of the computer for correct connection and damages. A: Check the USB cable for damages.
Warranty All products sold by the Conbrov Group are covered by a 12-month full replacement warranty. Happy with it? Share your experience with an Amazon review. Or any questions? Our friendly customer services team are ready to help: support@conbrov.com Contacting us via the above email address is the quickest way to reach our support team.
Page 22
All trademarks or registered trademarks are the property of their respective owners. About Us Conbrov Electron Co., Ltd. founded in 2003 is an innovative technology research company specialized in personal surveillance cameras and on-dash cameras. Conbrov products and technology are patent protected by PCT or U.S. Patent Office.
Need help?
Do you have a question about the T19 and is the answer not in the manual?
Questions and answers