Safety; General Safety Notes; Problem-Free Use - Mercedes-Benz Rear-Seat Entertainment System Manual

Table of Contents

Advertisement

Safety

General safety notes

WARNING
G
Your attention must always be focused on
the traffic conditions.
As the driver, do not attempt to make
adjustments to the Rear-Seat
Entertainment System while driving. While
the vehicle is in motion, the Rear-Seat
Entertainment System may only be used
and operated by the rear-seat passengers,
provided that they remain seated with their
seat belts fastened.
When using the Rear-Seat Entertainment
System with Bluetooth
that appropriate volume levels are not
exceeded so that you can always hear, in
particular, sounds from outside the
vehicle.
WARNING
G
The Rear-Seat Entertainment System
contains no parts which you can service
yourself. For safety reasons, only let a
qualified specialist workshop perform any
possible maintenance work.
Mercedes-Benz recommends that you use
an authorized Mercedes-Benz Center for
this purpose.
WARNING
G
Do not pour or spray fluids over the
screens of the Rear-Seat Entertainment
System. This could result in a fire or
electrical shock.
! When folding forward the rear bench
seat, make sure that the rear bench seat
does not collide with the front seats and
the Rear-Seat Entertainment System
screens. You could otherwise damage
the screens and the rear bench seat.
®
speakers, ensure
! When adjusting and folding down the
seats, there is a danger the screens could
collide with adjacent components if the
screens are fitted. Adjust the seat with
appropriate care to prevent damage.
! Different sources of radiation, e.g.
mobile phones can interfere with the
Rear-Seat Entertainment System. This
can impair the playback quality. Keep the
number of sources of radiation in the
vehicle as low as possible.

Problem-free use

High temperatures
Protect the screens against constant, direct
sunlight.
! If a screen becomes very hot, a safety
mechanism switches it off.
Low temperatures
Strong temperature fluctuations can result in
condensation forming on the internal parts of
the screens. This can impair the
functionality. Wait until the screens have
adjusted to the ambient temperature before
switching them on.
Safety
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents