Craftsman 580.761652 Owner's Manual page 5

Cutthetiewraps onthehighpressure h ose and
connect highpressure h ose togun. T ighten by
hand.
= Place assembled spraygunonholder.
- Remove p lastic capandconnect highpressure
hosetopump. T ighten byhand.
o
o
Screw nozzle to nozzle extension.
Connect nozzle extension to spray gun.
CHECKLIST
Before you operate your new high pressure washer,
to be sure you receive the best performance and sat-
isfaction from this quality product, please review the
following checklist:
• Al! assembly instructions have been completed.
• The high pressure hose connections to the spray
gun and to the pump are tight and secure.
While learning how to use your high pressure
washer, pay extra attention to the following important
items:
o
o
Engine oil is at proper levet
Be sure gas tank is filled properly with clean,
fresh, unleaded gasoline.
Become familiar with all controls - their location
and function. Operate those controls before start-
ing the engine.
,ik
CAUTION: Any attempt to crank or
start the engine before it has been
properly serviced with the recommend-
ed oil may result in an engine failure.
See Page 8 for instructions on adding
oil and proper oil specifications,