Attaching To The Das-1600 Or Das-1200 Series; Figure 4-4. Attaching To A Das-1600 Or Das-1200 Series - Keithley ERB-24 User Manual

Attaching to the DAS-1600 or DAS-1200 Series

J2
DAS-1600 or
DAS-1200 Series board
Figure 4-4. Attaching to a DAS-1600 or DAS-1200 Series Board
To attach the ERB-24 to a DAS-1600 or DAS-1200 Series board, first
attach the DAS board end of the PIO cable that comes with the DAS-1600
and DAS-1200 Series boards to the PIO cable connector (J2) on the DAS
board. Next, install the 37-pin D-type connector of the PIO cable in the
connector panel next to the main I/O connector (J1) of the DAS-1600 or
DAS-1200 Series board. Finally, attach connector J14 on the ERB-24 to
the 37-pin D-type connector of the PIO cable with the C-1800 cable.
Figure 4-4 illustrates these connections.
PIO cable
J14
C-1800 cable
ERB-24
4-5