Cabling And Wiring; Connector Pin Assignments - Keithley ERB-24 User Manual

4

Cabling and Wiring

Once you have set up the ERB-24, you can attach accessories and wire
applications to the board. This chapter describes the pin assignments of
the connectors on the ERB-24 and how to attach the ERB-24 to digital
I/O boards.

Connector Pin Assignments

The ERB-24 board contains two connectors: a 37-pin, D-type, male
connector (J14) and a 50-pin connector (J15), shown in Figure 3-1. The
pin assignments of the 37-pin connector are shown in Figure 4-1; the pin
assignments of the 50-pin connector are shown in Figure 4-2.
4-1