General Operation; Bluetooth Mode - borne BTSPKT01 User Manual

This speaker has multiple functions:


Bluetooth Mode


Audio Line In Mode (Auxiliary)

Audio Line In Mode (RCA)
1. Plug-in the included AC adapter into a wall outlet providing 120V, and the other end to the
Bluetooth Tower Speaker 12V / 1.5A DC Input Jack on the rear side.
2. Turn the Power Switch on the back of the Bluetooth Tower Speaker to the ON position. A Blue
indicator light will illuminate under the `Power` logo at the top of the Speaker.
3. The Bluetooth Tower Speaker is now powered on and ready to use.
4. To put the Speaker into Standby Mode, press the Power Button on the Speaker or the Remote
Control. A Red indicator light will illuminate beside the `Standby` logo confirming the Speaker is
in Standby Mode.
5. To increase or decrease the volume on the Speaker, press and hold the Volume Up or Volume
Down Button on either the Speaker or Remote Control.
6. To skip songs forward or backward, press the Next or Previous Buttons on either the Speaker or
Remote Control.
7. To pause and resume playback, press the Play/Pause Button on either the Speaker or Remote
Control.
8. To mute the sound at any time, press the Mute Button on the Remote Control or the Speaker.
1. By default, the Bluetooth Tower Speaker powers on into Bluetooth Mode. (If you have switched
to another mode, use the Mode Button either on the Remote Control or on the Bluetooth Tower
Speaker to switch back to Bluetooth Mode. A Blue indicator light will illuminate beside the `BT`
logo.
2. Once the Bluetooth Tower Speaker is in Bluetooth Mode, you will hear an audible tone indicating
the Speaker is in pairing mode. On your device, navigate to its Bluetooth settings and turn ON
Bluetooth. Then allow for your device to discover other Bluetooth devices. When you see
`BTSPKT01` appear on your device, pair with it. Another audible sound will be heard confirming
the Speaker has been paired with your Bluetooth device successfully.
NOTE: Please refer to your Bluetooth devices user manual on Bluetooth pairing.
NOTE: Paired devices will remember each other. Unless pairing information is deleted, re-pairing is
not required after the first time.
NOTE: If you want to pair the unit with other Bluetooth enabled devices, please disconnect the
existing device and pair with the new device according to the steps above.
3. Once paired, play any audio from your Bluetooth device as usual and the sound will be heard
from the Bluetooth Tower Speaker.
NOTE: If sound cannot be heard, make sure to raise the volume both on your Bluetooth device,
and on the Bluetooth Tower Speaker.

GENERAL OPERATION

BLUETOOTH MODE
E-6