Remote Control Battery Installation - borne BTSPKT01 User Manual

REMOTE CONTROL – BATTERY INSTALLATION
A battery will already be included inside your remote control. For first time use, please pull out the
plastic insulation tab to activate the battery connection with the remote. Your remote is now ready to
use. See illustration below.
To install or replace the battery in the remote control, follow the below steps:
2. Turn the remote over on its backside and locate the Battery Bay.
3. Slide the plastic tab on the Battery Bay to the right with your right thumb and hold (1).
4. Simultaneously, use your right index finger to pull out the battery tray (2).
5. A CR2032 battery (3V) may only be used.
6. Once battery has been replaced, slide the battery tray back into the remote.
NOTE: Positive (+) side of the battery must face up. See illustration below.
The operating range of the Remote Control to the Bluetooth Tower Speaker is approximately 6
meters and at a 30º angle on either side of the Bluetooth Tower Speaker. See illustration below.
E-5