Advertisement
Warm and Cool Temperature Adjustments
Open
Cover
Thermoplus Programming Mode
The ThermoPlus AS1 has been designed for minimal user
intervention, however should any changes be required please
press buttons 4 and 8 simultaneously to enter the programming
mode, this will allow you to;
- Check the current time/date/year
- Check the current profile
- Set a new pre-set profile
- Set a user defined profile
PLEASE NOTE; Upon completion of
the instructions above, please
ensure that you exit the programming
mode by pressing button 4 and 8 simultaneously.
Time and Date Check
The ThermoPlus thermostat has been pre-set with the current
time and date during manufacture. No alteration should be
required to the time and date, however if any modification
is required please refer to the flowchart on next page.
Select warm
or cool
temperature
by pressing
"WARM /
COOL"button
Adjust the
temperature
by using + / -
buttons
4
8
Once
adjustment
is complete
close the
cover
4
Advertisement
