Memory Copy - Sanyo CZP 2141 TX Instruction Manual

Pre-Settinq Of Stations
Upto32broadcaststations inyourreception area can b~.tOt-d inthe electronic m,mO~Y.
n Press and hold ~ /s (Recall) button ~ for more than 2
~ Press O (Memory) button~.
m
~ Press "1" button of the programme selector ~ to select
~ Repeat steps~ tom for other desired channels.
the pre-set mode.
ProgrammE
position \
7 , ,
fw~, ------------
~ Press the programme selector
programme position.
TVA9
ALT
&
' 29 VL
lrl/--------------
Channel
band
—
~ to select the desired
E
6 VL
I
-------------- .
~ Press BAND selector@ to select the channel band.
lb 1
6 VH
--------------
When BAND selector is pressed, the frequency will be set to the
Iowestfrequency in the set band.
Channel band VL, VH and U are for the following channel
groups.
VHF Range
VHF
LOW
BAND: Channels I – 3
VHF High BAND: Channels 4– If
UHF Range
UHF BAND:
Channels 21 – 69
The channel (VL, VH or U) Band is displayed on the screen.
~ Press and hold A or ~ (volume) button ~ until the desired
station appears.
[ ] Press ~/s (Recall) button ~. This completes the pre-
!-
6 VH
Imnmmm I ------------
The
kmber of upright segments
increases for a higher-frequency
channel.
–lo–
setting.
&&-
L&l
'E
o
3
(q
<> 1~)
BAND
Q/s
"F'
1
6
Memory Copy
This TV tuning system has an-
other advanced feature called
"memory copy".
For example, if you wish to copy the lV channel in the pro-
gramme position "2" into the programme position "6":
1. Select the programme position "2".
2. Press and hold ~ /s(Recall) button @ for more than 2 sec-
onds.
3. Press "l" button of the programme selector ~ to select
the pre-set mode.
4. Press "6" button of the program me selector ~ .
5. Press O (Memory) button ~.
6. Press a/S (Recall) button ~.