Table of Contents
Advertisement
POWERI
BRIGHTNESS
PLUG
COAXIAL
WIRE
CONNECTOR
CONNECTOR
PLATE
FIGURE 4-5. INTERNAL CABLE CONNECTIONS (MONITOR)
16. Facing the back of the monitor, lift the monitor chassis out of the housing by
slightly rotating the chassis toward the rear and sliding it out of the housing.
17. Using a
3/ 16 "
hex driver, remove the internal keyboard/monitor interface cable
connector from the connector plate by removing the two screws located on
either side of the connector (Figure 4-6). This step completes monitor
disassembly.
1377 .20-01-3/76
4-5
Advertisement
Table of Contents
