Page 1
MLT1522 User’s Guide 15" LCD Stereo Monitor with Integrated TV Tuner * High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts. Before operating this product, please read these instructions completely.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 4
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. (This Caution Marking is located at the rear enclosure of the unit.) WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 5
13. LIGHTNING To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
To operate the unit using AC power, connect the AC adapter (included) to the 12V IN jack DC 12V IN jack (z) on the rear of the unit. Connect the AC cord to the adapter and connect the other end to a wall outlet having 120V AC, 60Hz only. NOTE: The AC adapter is located at the rear of the base stand.
LOCATION OF CONTROLS (CONTINUED) REAR PANEL DC 12V IN Jack (z Earphone Jack UHF/VHF Antenna IN Jack VIDEO IN Jack AUDIO Right IN Jack REMOTE AUDIO Left IN Jack S-VIDEO IN Jack VGA (PC) AUDIO IN Jack VGA (PC) IN Jack 1.
BATTERY INSTALLATION Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) VHF/UHF 75 Ohm Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) REAR OF TV 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR. 2.
CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT INCLUDED.) Audio cords CONNECTION USING AUDIO/VIDEO CABLES: Follow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT INCLUDED.) 1.
Page 13
CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect a DVD player to your television using the S-Video cable. (CABLES NOT INCLUDED.) Audio cords CONNECTION USING “VGA TO COMPONENT” CABLE: Follow the instructions below to connect a DVD player to your television using "VGA to COMPONENT” Cable (CABLES NOT INCLUDED.) From AUDIO OUT jacks Audio cords...
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.) This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted from –5° to +25°. NOTE: Do not force the LCD monitor over its maximum viewing angle settings as stated above. Attempting this will result in damage to the monitor and stand.
TURNING THE MAIN POWER ON Press the POWER button to turn on the TV; the POWER indicator will light orange. SETTING THE VIDEO Main Disp Image Setup Audio Setup PC Setup TV Setup Language Recall Quit Press the POWER button 1 to turn on the TV; the POWER indicator will light orange.
IMAGE SETUP Main Disp Image Setup Audio Setup PC Setup TV Setup Language Recall Quit Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the MENU button 2; the Main Menu screen will appear. S-Video Return Press the CHANNEL/Navigation UP 1 or DOWN 2 button until...
AUDIO SETUP Main Disp Image Setup Audio Setup PC Setup TV Setup Language Recall Quit Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the MENU button 2; the Main Menu screen will appear. S-Video Return Brightness...
PC SETUP (MUST BE SET TO PC MODE) Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select PC mode. Press the MENU button 3; the Main Menu screen will appear. Press the CHANNEL/Navigation UP 1 or DOWN 2 button until COLOR is selected, then press the ENTER button 3 to select it.
Page 19
PC SETUP (CONTINUED) Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Phase is selected , then press the ENTER button 5 to select it. Set the desired phase using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
SETTING THE SYSTEM AND SETTING THE CHANNELS INTO MEMORY Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select TV mode. Press the MENU button 3; the Main Menu screen will appear.
After setting channels into memory, you can add or delete channels as follows: Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select the TV mode. Select a channel to erase or add using the Direct Channel Selection/Number (0-9) buttons 3.
Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select the TV mode. Adjust the volume level by pressing the VOLUME UP/Navigation Right 1 or VOLUME DOWN/Navigation Left 2 button.
MUTE Press the MUTE button to turn off the sound. The TV’s sound will be silenced and “MUTE” will appear on the screen. The sound can be turned back on by pressing this button again; “MUTE” will disappear from the screen. TV/VIDEO Repeatedly press this button to cycle through the device(s) connected to the INPUT jacks (TV/CATV, AV, S-Video, PC...
INFO Press the INFO button once to show the mode (channel number if in TV/CATV mode). Press a second time to clear the screen or wait three seconds and the screen will clear automatically. TV OPERATION (CONTINUED) EARPHONE For private listening, insert an earphone into the EARPHONE jack on the rear of the unit.
WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing-impaired viewers or it will translate and display text in another language. CLOSED CAPTIONING WITH A VCR Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact.
V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, the program will be blocked. V-CHIP SET-UP Main Disp Image Setup...
Bass Balance Return MPAA RATING SET-UP TV Setup AIR CATV Auto Program Add Erase CH Close Caption VChip Control System Setup Return Enter the V-CHIP menu screen as described on page 25 VChip Lock (Steps 1 & 2). Language English PC Setup Color H Position...
TV RATING (CLASS OPTION) SET-UP VChip Lock TV Setup AIR CATV Auto Program Add Erase CH Close Caption VChip Control System Setup Return Enter the V-CHIP menu screen as described on page 25 (Steps 1 & 2). Language English PC Setup Color H Position V Position...
Balance Return CHANGING THE PASSWORD TV Setup AIR CATV Auto Program Add Erase CH Close Caption VChip Control System Setup Return Enter the V-CHIP menu screen as described on page 25 (Steps 1 & 2). Language English PC Setup Color H Position V Position Phase...
Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POWER No power. The AC cord is not connected. TV BROADCAST RECEPTION TV station experiencing problems. Poor or no picture. Antenna/CATV connector is not connected. Possible local interference. TV station experiencing problems. Picture wobbles or drifts.
RECEPTION DISTURBANCES Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television interference are shown below.
SPECIFICATIONS Power Source ... AC 120V, 60Hz Max. Power Consumption...36W LCD Monitor ...15" LCD Panel Viewing Angle...H: 170° V: 170° Screen Ratio ...4:3 Resolution ...1028 x 768 Contrast Ratio ...500:1 Brightness...250 nits Speaker Output Power ...2W x 2 HDTV Ready supported ...(480i/480p/1080i/720p) TV Tuner.
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
Page 34
Memcorp, Inc. Weston, FL Printed in Taiwan Visit our website at www.memorexelectronics.com...