Battery Replacement; Sensor Replacement - Nuvair Pro O2 alarm Analyzer Operation Manual

8.2. Battery Replacement

Be sure to dispose of spent, leaking, or damaged Battery properly, according to local
regulations.
The following pictures illustrate the steps required to replace the batteries in the Analyzer.
Step 1. Remove
Screws
Step 2. Remove
Back Cover
Step 4. Replace
Back Cover -
Do Not Pinch
Wires
Step 5.
Reinstall
Screws

8.3. Sensor Replacement

You may take note of your sensor number before installing a new sensor serial
number.
Be sure to dispose of spent, leaking, or damaged Sensors properly, according to local
regulations.
Do not swallow (ingest) either the electrolyte from the Sensor or the Sensor itself. The
Potassium hydroxide chemical contained in the Sensor will cause severe injury or
death. If electrolyte or the Sensor is swallowed, seek medical attention immediately.
NUVAIR Rev.02.01.2012
Pro O alarm Oxygen Analyzer Manual
2
Step 3.
Remove &
Replace Old
Battery
Step 6. Turn
Analyzer On
Step 7.
Perform
Calibration
Sensor Serial
Number
14
Page
TM
Pro O alarm Oxygen Analyzer
2