Download Print this page

Rockford Fosgate DETECT-A-FINGER RKC-502 Installation Manual page 6

Drop probe device for resistance-type spot welders

Advertisement

SECTION 1—IN GENERAL
Detect-A-Finger
Drop Probe Device-Welder
®
Danger Sign(s) to be Mounted on Machine
Accompanying this equipment is a 5" x 6" polyethylene danger sign, Part No. KSC-055. This sign MUST
BE PERMANENTLY MOUNTED IN A PROMINENT LOCATION on the machine where this equipment is
installed. This sign must be in a LOCATION THAT IS EASILY VISIBLE to the operator, setup person,
or other personnel who work on or around this machine. ALWAYS mount this sign with bolts or rivets
when installing the enclosed equipment.
If any danger sign becomes destroyed or unreadable, the sign must be replaced immediately. Contact factory for
replacement danger sign(s).
Never operate this machine unless the danger sign(s) is in place.
Part No. KSC-000 Operator
Safety Precations Sign
"Mechanical Power Press Safety" Booklet
A copy of Booklet No. MPPS (Mechanical Power Press Safety) is available
upon request. This booklet is copied verbatim from the CFR (Code of Federal
Regulations) and contains all relevant sections of the OSHA standards concerning
power presses with which an employer (user) must comply. The enclosed
equipment must be installed, used and maintained to meet these standards.
Specifically, any time a foot switch is used, a suitable point-of-operation
safeguard or device must be used to prevent bodily injury. In addition, every
press must be provided with a point-of-operation safeguard! Please review
this booklet before installing the enclosed equipment. If you are unfamiliar with
these detailed safety regulations, which include regulations on safeguarding
the point of operation properly, you may want to attend our regularly scheduled
machine safeguarding seminars. To obtain detailed information about these
training seminars, please call, fax, write, or check our Web site. Our telephone,
fax number, Web site, and mailing address are on the front cover of this manual.
6
Front Side
Part No. KSC-055 Danger Sign
(Foot) - Standard
Part No. KSC-055S - Spanish
Part No. KSC-055F - French
Reverse Side
Rockford Systems, LLC
Call 1-800-922-7533

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Detect-a-finger rkc-500 series