Table Of Contents - Rockford Fosgate DETECT-A-FINGER RKC-502 Installation Manual

SECTION 1-IN GENERAL
Detect-A-Finger Drop Probe Device-Welder
®
SECTION 1 - IN GENERAL .............................................. 2 - 8
SECTION 2 - INSTALLATION OF COMPONENTS ........ 9 - 16
Control Box ........................................................................ 9
Sensing Probe ............................................................ 10-11
Other Components That May Be Required ................ 12-15
Installation Considerations ............................................... 16
Safety Precautions
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
This safety alert symbol identifies important safety messages in
this manual. When you see this symbol, be alert to the possibility of
personal injury, and carefully read the message that follows.
CAUTION used without the safety alert symbol indicates a potentially
CAUTION
hazardous situation which, if not avoided, may result in property damage.
Efficient and safe machine operation depends on the development, implementation and enforcement of a safety
program. This program requires, among other things, the proper selection of point-of-operation guards and safety
devices for each particular job or operation, a thorough safety training program for all machine personnel, that includes
instruction on the proper operation of the machine, the point-of-operation guards and safety devices on the machine,
and a regularly scheduled inspection and maintenance program.
Rules and procedures covering each aspect of your safety program should be developed and published both in an
operator's safety manual, as well as in prominent places throughout the plant and on each machine. Some rules or
instructions which must be conveyed to your personnel and incorporated into your program include:
Never place your hands or any part of your body in this machine.
Never operate this machine without proper eye, face and body protection.
Never operate this machine unless you are fully trained, instructed, and have read the
instruction manual.
Never operate this machine if it is not working properly - stop operating and advise
your supervisor immediately.
Never use a foot switch to operate this machine unless a point-of-operation guard or
device is provided and properly maintained.
Never operate this machine unless two-hand trip, two-hand control or presence sensing
device is installed at the proper safety distance. Consult your supervisor should you
have any questions regarding the proper safety distance.
Never tamper with, rewire or bypass any control or component on this machine.
A company's safety program must involve everyone in the company, from top management to operators, since only as a group can
any operational problems be identified and resolved. It is everyone's responsibility to implement and communicate the information
and material contained in catalogs and instruction manuals to all persons involved in machine operation. If a language barrier or
insufficient education would prevent a person from reading and understanding various literature available, it should be translated,
read or interpreted to the person, with assurance that it is understood.
FOR MAINTENANCE AND INSPECTION ALWAYS REFER TO THE OEM's (ORIGINAL
MACHINE MANUFACTURER'S) MAINTENANCE MANUAL OR OWNER'S MANUAL. If you do
not have an owner's manual, please contact the original equipment manufacturer.
© 2018 Rockford Systems, LLC. All rights reserved. Not to be reproduced in whole or in part without written permission. Litho in U.S.A.
2
SECTION 3 - OPERATING PROCEDURES &
TROUBLESHOOTING ......................................................... 17-18
SECTION 4 - REPLACEMENT PARTS ............................... 19
SECTION 5 - ORDER FORM & RMA FORM ...................... 20
Rockford Systems, LLC
Call 1-800-922-7533