Advertisement
state.
B) when the Calorie is less than 1000Cal, the big second pin moves forward to 12 position
for one second, then points to Calorie, and the big lattice (hour position) represents
100cal, and the small lattice represents 20Cal.
C) when the Calorie is greater than 1000Cal, the big second pin stays forward to 12
position for one second, then moves forward to the 10 o'clock position, and moves around
two seconds, and vibrates.
D) indicates that after the Calorie is finished, the large second pin will recover the
internal time.
（8）
Piecewise pattern of pedometer:
A) press S2 for one second to enter the segmented mode. Watch vibrate.
B) after entering the segmentation mode, the 6/9 fine needle returns to zero, and the
record shows the steps in the segmentation mode.
C) you can exit the segmentation mode by S2 one second at any time, or automatically
segment mode after 12 pm.
D) the steps in the segmentation mode automatically count the total number of steps per
day and will not be lost.
（9）
Call reminder: in normal function mode, if the watch is connected with the mobile phone,
Phone calls will send a call to send a call to notice the watch, watch the end received orders,
12 minute needle point to the position of phone-Call for one minute, accompanied by a App set
of vibration reminding. Users can press any button to stop the reminder, or automatically stop
the reminder after one minute. When the caller hangs up the call, the party refuses or receives
the call, and automatically stops the reminder.
（10）
：
MS reminding
In the normal function mode, if the watch and the mobile phone are in the paired connection
state, the SMS will send the command to notice the watch. After the watch receives the command,
the fine needle points to the SMS position for one minute at 12 time, and is accompanied by
the vibration reminder set by the App. Users can press any button to stop the reminder, or
automatically stop the reminder after one minute.
（11）
E-mail reminding
In the normal function mode, if the watch and the mobile phone are in the paired connection
state, the E-mail will send the command to notice the watch. After the watch receives the command,
the fine needle points to the E-mail position for one minute at 12 time, and is accompanied
by the vibration reminder set by the App. Users can press any button to stop the reminder, or
automatically stop the reminder after one minute.
（12）
Facebook reminding
In the normal function mode, if the watch and the mobile phone are in the paired connection
state, the Facebook will send the command to notice the watch. After the watch receives the
command, the fine needle points to the Facebook position for one minute at 12 time, and is
accompanied by the vibration reminder set by the App. Users can press any button to stop the
reminder, or automatically stop the reminder after one minute.
（13）
Whatsapp reminding
In the normal function mode, if the watch and the mobile phone are in the paired connection
：
：
：
Advertisement
