Page 1
Italia Tel. (+39) 02-9290571 Fax (+39) 02-92118024 www.aim-sportline.com U.S. OFFICES AIM SPORTS LLC 31889 Corydon, Suite 130 Lake Elsinore, CA 92530 U.S.A. AIM SPORTS LLC SE 1636 9th St. SE Unit B Roanoke, VA 24013 U.S.A. Toll Free 1.800.718.9090 www.aimsports.com...
Page 2
INTRODUCTION nuovo Lap Timer GPS Solo. INCLUDED ITEMS AND INSTALLATION ACCESSORIES Solo è il risultato di migliaia di ore di lavoro SOLO AT A GLANCE di una continua ricerca tecnologica di una grande passione per le competizioni spor-...
Page 3
Circuits, hill climbs, regularity, point to point races, You can connect SoloDL to performance tests. SmartyCam, AIM on- board Solo can fit all situations with a camera, and then you have a simple keyboard video with high precision configuration. figures.
(K Line/CAN) • Solo USB cable (2) • USB/AC power adapter (3) • SoloDL (6) • Solo power cable with 2m wired • USB cable (2) car lighter socket (4) • USB/AC power adapter (3) • Mounting bracket with screws (5) •...
CHAPTER 1 INCLUDED ITEMS AND INSTALLATION ACCESSORIES Installation Accessories Outlined below are several mounting options Solo can be installed in a variety of ways available for application-specific installations: depending on the application and your preferences. Suction cup bracket kit with screws;...
Page 6
Solo calculates the position of your vehicle This can be done in three different ways: 1. Solo comes with a wide list of tracks. You can check them pressing >>> or <<< until the page below on the left appears;...
MENU>>Display Setup>>Keyboard and select Locked. GPS Antenna The integrated GPS antenna is located on the top of Solo. In order to mitigate any possible CONNECTOR THREAD INSERT GPS signal interference, avoid positioning anything directly over the GPS antenna.
You can mount Solo to the included bracket using the two integrated magnets. This solution You can configure Solo in order to optimize its activity in dependence upon the typology of allows you to quickly and easily install and remove Solo.
Page 9
POWERING AND CONNECTING SOLO Powering Solo/SoloDL ECU Connection (SoloDL only) SoloDL receives the engine parameters Solo can be powered by the internal You can recharge the internal lithium rechargeable battery or by an external 12 battery through the power socket or from the ECU of your vehicle.
>>> or <<< on: Circuit or Point to Point acquisition place Solo in the open air so or simply run a track lap to permit Solo to (except for performance tests) that a wide part of the sky is visible.
Page 11
In case of Performance tests, the Start Line To set the type of race, follow this path: is triggered at the increment of Speed, For showing all these data, Solo has some while the Finish line depends upon the se- pre-defined pages, showing pre-organised MENU>>Race Mode SetUp.
Page 12
Pages: Time zone and time/date format settings MENU >> Display Setup >> Pages Setup Solo can show the date and time in >> Custom Pages Setup. different formats enabling or not legal time. Follow this path MENU >> Set Time/Date...
Engine Control Unit. • Analyzing the test data You can use RaceStudio2 for specifying the Aim constantly updates Race Studio 2 soft- ECU of your vehicle and for selecting the ware. Each new release is available free to desired information.
Page 14
• If split coordinates are available click on • Go to the Starting Point with Solo in your You can manage the list of the tracks inside “+” and add as many split as are available...
So, if the vehicle does not move, even with Speed Races Regularity Races Performance Tests the engine ON, Solo does not record data. When Speed start going up, Solo changes As we have already seen, there are three types As in Speed Races, Solo shows Rolling, Performance tests can be ¼...
DATA RECALL Data Recall To review data stored in Solo memory, push MEM button. The Data Recall page appears; it is as shown below on the left for“Speed”and“Regularity”mode and can include more pages; for performance mode however, all data is shown in a page as below:...
PC and Data Analysis through Race Studio2 The best way to understand your Data Download performance, is to analyse your Solo data on your PC. Data Downloading is very simple: Only with a wide screen can you compare • Connect Solo to your PC two laps, sector after sector, evaluate when •...
Page 18
SoloDL Connection with SmartyCam If you have a SoloDL, you can connect it to SmartyCam, to get a powerful system. Let us introduce SmartyCam, AIM’s on- board camera. Briefly, it records the video, automatically adding in the overlay and graphical...
Page 19
• SmartyCam can record SoloDL data on its from ECU Transmit on top of the page and these to SmartyCam “microSD”Card, for a quicker management • SmartyCam can read Solo DL GPS and channels will be automatically sent to of them. GPS lap time SmartyCam.
Page 20
CHAPTER 11 SOLO DL CONNECTION WITH SMARTYCAM Interaction with SmartyCam SoloDL is provided with a dedicated Smar- To enable this page follow this path: tyCam page showing all the useful MENU>>Display Setup>>Enable/Disable Pages, scroll until finding SmartyCam page: information about SmartyCam Status, that...
Page 21
SOLO TEAM The Solo Team GIULIO CERIANI EMILIANO BINA PAOLO VIGANO FRANCESCO OTTOVEGGIO OUR CHIEF HARDWARE LEAD SOFTWARE HARDWARE DESIGNER AND FIRMWARE DESIGNER DESIGNER FOR THE LAST 30 DESIGNER AND THE SELF PROCLAIMED “DA VINCI AND OUR RESIDENT GPS YEARS FATHER OF RACE STUDIO OF BOARDS”...
Need help?
Do you have a question about the Solo and is the answer not in the manual?
Questions and answers