Electrical Connection - IDEAL TP12KC-DE Installation Instructions Manual

Electrical Connection

NOTE: WE STRONGLY RECOMMEND THAT YOU USE A
LICENSED, PROFESSIONAL ELECTRICIAN TO INSTALL
Filling the Hydraulic Fluid Tank
Remove the vent-cap from the top of the Hydraulic Fluid Tank attached to the Power
Unit. Using a funnel, carefully pour in the Hydraulic Fluid (approximately 12 quarts)
until fluid gets near the top of the tank. Replace the vent-cap.
***********************************************
We Recommend Using One of the Following Fluids:
***********************************************
THE POWER TO YOUR TWO POST LIFT!
Dextron III Non-Detergent
AW #32 Hydraulic Oil
11