Replacing The Ear Pads; Replacing The Headband Paddings - Sennheiser HDA 300 Instruction Manual

Audiometric headphones

Hide thumbs Also See for HDA 300:

Table of Contents

▷

Observe the manufacturer's instructions. Let the product dry before

using it.

▷

Regularly replace the headband paddings, ear pads and diaphragm

covers (see the following chapters, spare parts are available from your

Sennheiser partner):

– e.g. once a year, depending on the frequency of use or

– if they show clear signs of wear.

Replacing the ear pads

1. Peel the ear pad up and away from the ear cup.

2. Slide the new ear pad onto the ear cup. Make sure that the edge of the

ear pad disappears completely in the provided groove.

1. Slightly lift the headband padding at one end and remove it from the

holder by carefully sliding it in the direction of the ear cup.

2. Slide the new or other headband padding (e.g. XL headband padding)

into the holder. Repeat for the second headband padding.

Cleaning and maintaining the HDA 300

HDA 300 | 11

Table of Contents