Connect The Usb Cable - Hitachi PC-KCM50 User Manual

2.3 Connect the USB cable

Connect the USB Micro-B plug of the USB cable to the USB Micro-B connector of the
Biometric Reader.
USB Micro-B connector
Connect the plug A of the USB cable to the USB port of your PC.
Attention

Connect the USB plug and the USB connector securely. Hold the plug end when
connecting or disconnecting the USB cable to prevent the connectors from
damage.
Important

When connecting the USB cable via a USB hub, check the supply current. The
Biometric Reader may malfunction with insufficient power supply.

Do not use a USB 1.1 hub for a USB 2.0 PC port, which may cause the Biometric
Reader to malfunction.

Biometric Reader may generate some heat due to the use of infra-red light inside,
but this will not cause any malfunctions.

Do not connect more than one Biometric Reader simultaneously to one PC. If
multiple Biometric Readers are connected, they will not work properly.
 After connecting the Biometric Reader to your PC, wait for at least 5 seconds
before performing any operation. In some PCs it may take more than 5 seconds
until the Biometric Reader becomes ready for use.
Biometric Reader
USB Micro-B plug
USB cable
10 / 20