With Vcrs - Sears 274.4372859 Owner's Manual

Using Your TV and Remote
With VCRs: Basic Operation
If the remote operates your VCR, this page will show you how to use it for
basic functions. See pages 6-7for more details on buttons used with your VCR.
Turn on the VCR
Turn off the VCR
A. Press channel 00, 03, or 04 on
the TV to see what the VCR is
doing.
B. Press VCR1 or VCR2,LD to set
the remote to control the VCR.
C. Press POWER to turn on the
VCR if it did not turn on when
you pressed VCR1 or
VCR2,LD.
A. Press VCR1 or VCR2.LD to set
the remote to control the VCR.
B. Press POWER.
Record one TV.program
and watch another
,o_t= vcRi _T.c,_ rv
°5
_O _O _O
_O _O _O
_O _O _O
,_, o O ,.5 .,
.A.
_7
A. Press VOR1 or VCR2°LD to set
the remote to control the VCR.
B. Tune the VCR to the channel
you want to record using
CHANNEL up or down or
pressing two number buttons.
C. Press RECORD to start
recording.
D. Press TVWCR on the VCR.
E. Press TV to set the remote to
control the TV.
F. Press CHANNEL up or down to
change channels on the TV.
G. To see the channel you are
recording, tune the TV back to
channel 00, 03, or 04.
Watch a tape in your VCR
A. Turn on VCR.
B. Insert a tape in the VCR.
C. Press PLAY to start the tape
playing.
D. Press STOP when you are
finished.
E. Press REW to rewind the tape.
10