Table of Contents
Advertisement
References
Trouble Checks
You may have problems
that can be fixed with a few minor adjustments.
Look for the type of problem
you are having
below and try, the suggestions
to get your TV going again.
For warranty information see the back cover.
Trouble
Checks
and Adjustments
Power
TV will not turn on
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries
in the remote are not dead.
Aim the remote at the TV and press TV.
Make sure batteries
are placed in the remote the right way.
See batteries
on page 2.
Unplug
TV for a few minutes
and then turn it on again.
No picture,
no sound
but
"rX" has power
Picture
Blank screen or Unusable
Signal appears
on screen
Check antenna connections.
Check position of Cable/Air
feature.
See page 27.
Try another channel.
Inactive channel
may be tuned.
Ivtake sure component
connected
to the VIDEO INPUT jacks is turned
on
if you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR
if watching
a VCR.
Make sure TV/VCR
button on VCR is in correct position.
Try another channel.
Scan the channels.
Picture
poor, sound okay
Picture-in-Picture
Can't get two different
d_annels
in picture-in-picture
Check antenna
connections.
Adjust TV picture.
See pages 16-I7.
Make sure small picture
is tuned
to channel 00.
Make sure the component
connected
to the back of the TV is turned
on.
Make sure a video cable is also connected
to the TV's VIDEO INPU'i" jack
if using an S-VHS component.
Make sure the AUDIO and VIDEO OUT jacks on the VCR, Laserdisc
player, or Camcorder
are connected
to the TV's VIDEO and AUDIO IN
jacks.
.blake sure VCR 1 Channel
is set to Disabled.
See page 9.
No picture
while using
picture-in-picture
with
S-VHS VCR or camcorder
Make sure a video cable is also connected
to the TV's VIDEO INPUT jack.
3O
Advertisement
Table of Contents
