Sound Settings - Sears 274.4279839 Owner's Manual

Adjusting Your TV
Sound Settings: Speakers
Follow the steps below to turn the speakers on or off in vour TV. The chart
below explains your options. This set incorporates special circuits which
enhance stereo imaging and effect when used with the TV's own speakers. If
external speakers are used the enhanced stereo effect may decrease.
1.
Select the Setup Menu
I
Label 13 :clear
Channel Memory: 13 Stored
Cable/Ai:r! _Cable • : _iii_:_
VCR1 Channel: Video .' :"_
Cable Channel: 03 .... :_
Speakers: Off _:
Press MENU repeatedly to select
the Setup menu. This menu is
white.
2. Highlight speakers
Controls Alarm Adjust Setup
Aut6pi:0gram i _ i.:
Label:: 13 clear
Channel Memory: 13 Stored
CablelAir: Cable :i.
VCR 11Channel: Video " ,;:
Cable Channel: 03
Press CHANNEL down until
Speakers is highlighted.
__ [o]]l
3. Turn Speakers on or off
4. Press
DONE to save the
setting
Controls Alarm Adjust Setup
Autoprogram
Label 13 clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: Video
Press + or - to turn the speakers
on or off.
Press DONE to save the setting.
Speakers
On
The sound comes from the TV's
internal speakers.
Off
No sound comes from the TV.
The sound is directed through the
speakers of an amplifier that is
connected to your TV.
19