Sears 274.4279839 Owner's Manual page 17

Using Your TV and Remote
With a Laserdisc: Programming and Basic Operation
Refer to your Laserdisc owner's manual to hook up your Laserdisc Plmler. The
remote may need to be programmed for your laserdisc. Use the codes below
or on the sheet packed in with your remote.
Program the remote for
your laserdisc
Basic Operation
]
I
Laserdisc Codes
Pioneer ........................ 33
Proscan ....................... 33
RCA ............................. 33
REC :
; ; i DISPLAY SKIP:30
MENURESET DONE
i " :
: •i ¸ ¸
: PIP MOVE FRZ SWAP
•
A. Point the remote at the audio
equipment and hold LDISC.
B. Enter the code for your brand
from the code list l_elow.
C. Release LDISC.
D. Press ON/OFF. If nothing
happens, try pressing LDISC
and then ON/OFF.
A. Tune TV to channel 00, 03, or 04.
B. Point the remote at the
Laserdisc and press LDISC.
C. Press ON/OFF to turn it on.
D. Use the buttons on the remote
that relate to laserdisc functions.
Not all buttons highlighted mav
work with your laserdisc.
F. Press ON/OFF to turn it off.
14