Maintenance; Storage And Transport - ALDI Q1W-SP20-1900A User Manual

Check the filter after each use and clean it if necessary. To do so, proceed as follows:
1. Screw the water inlet adapter
(see fig. 16).
2. Rinse the dirt filter out until it is free of dirt and deposits.
3. Put the dirt filter and the water inlet adapter back in place.
High pressure nozzle
− Clean the high pressure nozzle using the enclosed nozzle pin

Maintenance

The pump of the 2.2 kW high pressure washer itself requires no maintenance.
No additional care is necessary.

Storage and transport

NOTICE!
Risk of damage!
There is always some leftover water that remains in the 2.2 kW high
pressure washer and the pump that could result in damage.
− Do not store the 2.2 kW high pressure washer at temperatures
under the freezing point as this may result in frost damage.
− If you take the 2.2 kW high pressure washer out of commission
for a prolonged period of time, empty the cleaner container
and let the water drain out of the hoses.
AFTER SALES SUPPORT
01904727501 019022605
GB IRE
21 off and take the dirt filter (arrow) out
Figure 16
Figure 17
GB IRE
Storage and transport
(see fig. 17).
22
23
www.coreservice.co.uk