Using The Turbo Lance; Using The Rotating Brush - ALDI Q1W-SP20-1900A User Manual

GB IRE
Operation
Turning the nozzle head by 180° changes from the dot jet to the flat jet:
− Turn the nozzle head counterclockwise to set a dot jet. The further you turn the
nozzle head clockwise the wider the flat jet will become (see fig. 12).
The dot jet is particularly suitable for cleaning very dirty, confined
areas; the flat jet is ideal for cleaning surfaces.

Using the turbo lance

NOTICE!
Risk of damage!
When using the turbo lance, there is a very high risk of damaging
sensitive surfaces.
− Be carefully, start working at an increased distance and reduce
it if necessary.
The turbo lance produces a rotating high pressure jet that can also get rid of stubborn
dirt.
1. Stop the 2.2 kW high pressure washer
2. Briefly depress the trigger
3. Instead of the spray lance

Using the rotating brush

The rotating brush is a tool for delicately cleaning surfaces. In the process, the high
pressure jet is used to operate the brush; the water only strikes the surface to be
cleaned at low pressure.
The moving brush achieves the cleaning effect and the removed dirt is washed away
with the water.
20 20
www.coreservice.co.uk
Figure 12
6 and switch the ON/OFF switch
16 for the spray gun
14 insert the turbo lance
15 to release system pressure.
(see fig. 4, page 15).
13
AFTER SALES SUPPORT
01904727501
GB
5 to OFF.
019022605
IRE