Installing The Ats9371 - AlazarTech ATS9371 User Manual

Installing the ATS9371

There are four main steps involved in installation:
1. Physically install the digitizer(s) in your computer.
2. Install ATS9371 software driver
3. Install AlazarDSO software that allows you to setup the
hardware, acquire signals and view and archive them
4. Optionally, install:
a. The ATS-SDK software development kit, which
b. The ATS-GPU library, which enables you to
c. The ATS-GMA library, which enables you to DMA
The following paragraphs will guide you through this process in a
step-by-step manner.
ATS9371 User Manual
enables you to programmatically control the
ATS9371
perform real-time processing of data from the
ATS9371 on a CUDA
data from the ATS9371 on an AMD Radeon Pro
GPU card for OpenCL™-based development
®
compatible GPU
11