Using Your Refrigerator; Setting The Controls - Kenmore 795.7259 Use & Care Manual

SETTING THE CONTROLS

Temperature
• The Refrigerator Control is prest at 37°F (3°C) and
the freezer control is preset at 0°F (-18°C).These are the
recommended temperature settings for normal use and
conditions. Wait 24 hours for the refrigerator and freezer
to reach these temperatures
• The Refrigerator Temp Control range is from 33°F to 46°F
(1°C to 8°C). The lower the number setting, the colder the
refrigerator compartment will become.
• The Freezer Temp Control range is from -6°F to 8°F
(-21°C to -13°C). The lower the number setting, the colder
the freezer compartment will become.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
and when ice cream is firm. If the temperature in either
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Ice / Water
The dispenser will dispense water, cubed ice or crushed
ice. Press the appropriate icon of your choice: (
( ) crushed ice, ( ) water. When pressed, the icon
2 3
illuminate.
NOTE: The dispenser will not operate when either
of the refrigerator doors is open.
NOTE: If the Control Lock icon is illuminated, the
dispenser will not work. Disable the Control Lock to use
the dispenser again.
CAUTION: The control display is operated by touch.
Excessive moisture on the display may cause a
malfunction. Please keep the display clean and dry.

USING YOUR REFRIGERATOR

1
2
3
) cubed ice,
1
Airflow
Be sure not to block vents while loading
food into the refrigerator. Doing so will
restrict airflow
and may cause
the refrigerator
temperature to
become too warm or
cause interior moisture
buildup. (See air flow
diagram below.)
Accela Ice
• When you touch the Accela Ice
will light up in the display and will remain on for
24 hours.
The fun ction will automatically shut off after 24 hours.
• You can stop this function manually by touching the button
one more time.
• This function increases both ice making and freezing
capabilities.
Water Filter Reset
When the water filter indicator
change the water filter. After changing the water filter, press
and hold button for three seconds to turn the indicator light
off. You need to change the water filter approximately every
six months.
21
button, the indicator
icon turns on, you need to