Page 1
A link to registration can be found under the “SUPPORT” heading. While there check out our “TECH RESOURCES” section for more information on the tuning, maintenance, and the technology found in your MRP fork. GET THE LATEST INFO ON MRP PRODUCTS Follow us on: Facebook.com/MRPbike Instagram.com/MRPbike MRP IS A DIVISION OF: OWNER’S...
Page 2
When your fork requires an oil change or other internal product registration or proof of purchase then the warranty is one year from the date of manufacture. On receipt of the product by MRP, if it is found to be defective, MRP maintenance, MRP and experienced suspension service centers will determine replacement or repair of the product at its sole discretion.
Page 3
The total usable range of rebound 12. Install the wheel. Insert the axle through the disc brake side dropout, adjustment on the Bartlett is approximately 20 clicks. through the hub and into the captive nut on the non-disc brake side dropout.
Page 4
HUCK PUCK (AIR VOLUME) TUNING 65-70% of body weight in pounds (lbs.). For example, a 175 lb. rider The Bartlett comes stock with two Huck Pucks installed. You may should start with 118 PSI in the positive chamber. Most riders like slightly install as many as 5 total (3 additional) Huck Pucks.
Need help?
Do you have a question about the bartlett and is the answer not in the manual?
Questions and answers