All manuals and user guides at all-guides.com
1.
2.
3.
4.
5.
6.
7.
8.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
- 2 -
TABLE OF CONTENTS
GENERAL
Location of Controls ....................................................... 3
Resetting the Unit ........................................................... 4
Detaching the Front Panel ............................................... 4
Setting the Clock ............................................................. 4
Installation ....................................................................... 5
Connections ..................................................................... 6
......................................................... 9
Tuner Section .................................................................. 14
................................................................. 15
................................................ 29
............ 11
....................... 14
............................... 32