Safety Information - Huawei E630 Manual

Note: Do not remove the data card directly
without the following procedures to
avoid harms to your laptop, even though
the OS is in the hibernate or standby
mode.
1)
Double-click
display the Unplug or Eject Hardware
prompt.
2) Select and stop the hardware related to
the data card "NEC PCI to USB Open
Host Controller".
3)
When OS displays "It is safe to remove
the device", pull the data card out.
5. Uninstalling the
Management Program of the
Data Card
To uninstall the management program of
Huawei 3G data card, three ways are available.
Select Start > Control Panel >
Add/Remove Program to uninstall the
management program of Huawei 3G data
card.
Insert the delivered CD of the data card into
the laptop CD driver and run the install
program of the Huawei 3G data card
management program. Select Uninstall
Huawei 3G Data Card to uninstall.
in the status area to
Select Start > Programs > Huawei Data
Card > Uninstall to uninstall the data card
management program.

Safety Information

Read and follow these simple guidelines. Not
doing so may be dangerous or illegal.
General Recommendations
for Use
Always handle your data card with care and
keep it in a clean and dust-free place. Do not
expose your data card to open flames or lit
tobacco products.
Always keep your data card dry.
Do not drop, throw or try to bend your data
card.
Do not paint or scratch your data card.
Do not attempt to disassemble your data card.
Doing so will void warranty. Only authorized
personnel are allowed to do so.
This product requires a minimum distance of
2.5 cm from the body when in operation.
Do not touch the antenna unnecessarily.
Keep your data card in normal temperature.
Your data card can only operate between
4