Preparation - Huawei E630 Manual

When the data card has registered to a GPRS
(GSM/GPRS/EDGE) network, the indicator
is blinking in green. (The indicator is on for
100 ms and off for 2900 ms.)
When the data card has registered to a UMTS
(WCDMA/HSDPA) network, the indicator is
blinking in blue. (The indicator is on for 100
ms and off for 2900 ms.)
When the data card has been connected to a
GPRS network, the indicator is steady on in
green.
When the data card has been connected to a
WCDMA network, the indicator is steady on
in blue.
When the data card has been connected to a
HSDPA network, the indicator is steady on in
cyan.
When the data card is removed, the indicator
is off.

Preparation

1. Configuration
Requirements to the Laptop
To use the Huawei 3G data card, the following
configurations for the laptop are required.
Equipped with Type Ⅱ PCMCIA slot and
supporting CARDBUS.
CPU: 133 MHz Pentium or above. 500 MHz
Pentium or above is recommended.
Memory: 32 MB RAM or above. 128 MB or
above is recommended.
Free space on the hard disk: 30 MB or above.
Windows XP or Windows 2000 is installed.
Resolution for the laptop screen: 800 × 600
or above. 1024 × 768 is recommended.
2. Getting Your Data Card
Ready
Insert the SIM/USIM card into the slot of the
data card with the golden contacts side facing
downwards and the cut corner directing
inwards. Follow the direction on the back of the
data card.
2