Advertisement
LGIC
If you try to call in this case, you are prompted for the password and if the entered password is
-
identified, the call is established. In the lock mode, if you press [UNLOCK] button,
[UNLOCK] button is changed to [SEARCH] button.
Even in this case, whenever you try to call, the password is required but PIM is released
-
-
If you want the locking release, you should release this setup from the [Menu]+5.
l
If you select ' ON POWER UP' , the locking function is not immediately executed but when the
phone is switched on, it is automatically set to the lock mode and at the same time, the soft key is
changed to [Menu], [unlock].
¢ Ñ Default password is ' 0000' .
5.2.Restrict
* you can only call using the telephone numbers stored in the Phone Book.
l
Menu" +5+Password-4digit+2.
Select ' Yes' using v(center soft key) and press the SELECT key.
l
5.3. clear Calls
*
Function to delete all the telephone numbers stored in the last call list.
l
Select Menu + 5 + Password 4-digit + 3
l
Press OK key
5.4. Clear Memory
*
Function to delete all the contents stored in the memory address 01 ~ 200.
l
Select Menu +5 + Password 4-digit + 3.
l
Press OK key
¢ Ñ During the deletion, a message of ' Please, wait' appears and after the completion of the deletion
it returns to the stand-by status.
5.5. Emergency
* Function used to enter the emergency telephone number [Up to 3 numbers ]
l
Select Menu + 5 + Password 4-digit + 5.
If the telephone number stored in the telephone number 1is appeared empty, a message of
' Empty' appears.
l
Select the memory address where you want to make input using Soft Key1 (¡ å ) or ' V/#' key
l
Select the edit mode by pressing EDIT key.
l
Enter the telephone to store and press OK key.
Terminal Development Center
6
Advertisement
