Advertisement
LGIC
* Change the mode to use the CDMA only
10.1.4 Clear Errors [ Menu + 7 + 0 + 000000 + 1 + 4]
* Function used to delete the entities stored in the error list.
l
Select ' Menu +7+ 0 + 000000 + 1 + 4' .
l
Select ' Yes' of ' Yes/No' using center soft Key and press SELECT key.
10.1.5 Errors [ Menu + 7 + 0 + 000000 + 1 +5]
* Function used to verify the entities stored in the error list.
l
Select ' Menu +7+ 0 + 000000 + 1 + 5'
l
You can verify 20 lists of error using the next setup key (Soft Key1) or V/# key.
End => It returns to the stand-by status
Del => It returns to the previous state
10.2 Select [Menu + 7 + 0 + 000000 + 2]
* Select the system to be used.
l
Choose one of A Only / A Then B / B Only / B Then A / HOME Only / Standard Only
l
press ' SELECT' Key
10.3 Set NAM [Menu + 7 + 0 +000000+3]
* select one of NAM#1 ~ NAM#4
l
select one of NAM#1 ~ NAM#4
l
press ' SELECT' Key.
¢ Ñ Because NAM#1 ~ NAM#4 have different NAM PARAMER value if a selected NAM is not
matched registered number, it is not served
10.4 AUTO NAM [Menu + 7+ 0 + 000000 + 4]
* It is the function to automatically set the NAM that is identified with the subscribed number when
more than one NAM are used.
Terminal Development Center
11
Advertisement
