SEBSON GS412 Operating Instructions Manual

Radio heat detector

Advertisement

Operating instructions for the radio heat detector GS412
Index
1.
Safety instructions ........................................................................................................................... 3
2.
Suitable and unsuitable locations .................................................................................................... 3
2.1 Radio heat detectors should be installed in the following rooms: .................................................... 3
2.2 Rooms where no radio heat detector should be installed ................................................................ 4
3.
Startup ............................................................................................................................................. 5
3.1 Activation of the radio radio heat detector ....................................................................................... 5
3.2 Function Control of the radio heat detector ..................................................................................... 6
3.3 Activation and Deactivation of the mute mode ................................................................................ 6
3.4 Recurrent self-test of the radio radio heat detector on its function .................................................. 7
4.
Networking ....................................................................................................................................... 7
5.
RESET mode ................................................................................................................................... 8
6.
Explanation of the LED modes ........................................................................................................ 8
7.
Installation ........................................................................................................................................ 8
8.
Replacing batteries .......................................................................................................................... 9
9.
Notes to the use of batteries ............................................................................................................ 9
10. Technical Data ................................................................................................................................ 10
11. Behavior in case of fire ................................................................................................................... 10
12. Maintenance and cleaning .............................................................................................................. 11
13. Disposal of waste batteries.............................................................................................................. 11
14. General Disposal ............................................................................................................................ 12
15. CE Declaration of Conformity ......................................................................................................... 12
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GS412 and is the answer not in the manual?

Questions and answers

Summary of Contents for SEBSON GS412

  • Page 1: Table Of Contents

    Operating instructions for the radio heat detector GS412 Index Safety instructions ........................... 3 Suitable and unsuitable locations ....................3 2.1 Radio heat detectors should be installed in the following rooms: ............ 3 2.2 Rooms where no radio heat detector should be installed ..............4 Startup .............................
  • Page 2 Thank you for choosing a product of SEBSON. Please read the instructions carefully and keep them for looking up before start-up this product. A long and failure-free operation can only be guaranteed if the installation and start-up is done properly.
  • Page 3: Safety Instructions

    1. Safety instructions  Note: The alarm sound is very noisy! Your hearing can be damaged if you are exposed to the loud alarm sound over a longer period of time!  Please do not paint over the radio radio heat detector with paint or similar! ...
  • Page 4: Rooms Where No Radio Heat Detector Should Be Installed

    Figure 2: Mounting the radio heat detector on the ceiling ≤ 1m Note: If you are unsure about the mounting of the radio heat detector in your rooms, please advised by a qualified electrician! The radio heat detector must be installed on the ceiling in the middle of the room, because heat rises to the ceiling of the room and spread horizontally.
  • Page 5: Startup

     Do not install a radio heat detector in the immediate vicinity of doors and windows!  With A-shaped roofs the radio heat detectors may not be mounted at the highest point.  Rooms having a room temperature of below above 50°C. 3.
  • Page 6: Function Control Of The Radio Heat Detector

    Figure 4: Battery case on the back of the radio heat detector 3.2 Function Control of the radio heat detector To check the function, press and hold the TEST button. After pressing the key a very loud alarm will sound! Keep the radio heat detector at least an arm's length away from your body while pressing the TEST button.
  • Page 7: Recurrent Self-Test Of The Radio Radio Heat Detector On Its Function

    Recurrent self-test of the radio radio heat detector on its function The radio heat detector performs every 32 seconds a self-test. You can see this by a short blink of the LED. Note: In case of improper function of the radio heat detector, please contact the manufacturer! 4.
  • Page 8: Reset Mode

    5. RESET mode In order to perform a RESET, proceed as follows: 1. Remove the batteries. 2. Press and hold the TEST button while reinserting the batteries. Pay attention to the correct polarity! 3. The LED lights solid red for about 3 seconds after inserting the batteries. Note: Keep and hold the TEST button pressed! 4.
  • Page 9: Replacing Batteries

    8. Replacing batteries The radio heat detector makes a recurring beep sound in 32 second intervals for 7 days. Additionally the LED flashes. With this it points out that the battery must be changed. The radio heat detector is still fully functional at this time. However, it is recommended to replace the battery, as soon as the device is warning about the empty state of the battery! Note: The recurring warning sound can be muted for about 10 hours by pressing the TEST button.
  • Page 10: Technical Data

     The connection terminals never short-circuit!  Throw batteries never into the fire!  Keep batteries away from children and animals!  Please make sure that the batteries are not swallowed especially of infants. Here is danger to life! Dispose leaking batteries immediately as described in chapter: „ Disposal of waste batteries”. ...
  • Page 11: Maintenance And Cleaning

    After usage you can return batteries and / or accumulators gratuitous in the sales point or in their direct vicinity (for example at municipal collection points and trade). Otherwise, you can also return the batteries and / or accumulators by post to us: SEBSON - Gernotstr.17-44319 Dortmund – Germany...
  • Page 12: General Disposal

    15. CE Declaration of Conformity This product has been prepared according to the listed below guidelines.  EMC 2014/30/EU  RoHS 2011/65/EU  R&TTE 1999/05/EC SEBSON: Sebastian Sonntag - Gernotstr.17 - 44319 Dortmund – Germany - www.sebson.de...

Table of Contents