Tv Audio Switching - Denon AVR-X250BT Owner's Manual

Contents Connections
ARC
On the TV connected to the HDMI MONITOR connector, set whether to
receive sound from the TV via HDMI.
On: Use ARC function.
Off
Do not use ARC function.
(Default):
0 You can adjust the volume of this unit using the TV remote control.
0 If using this function, use a TV compatible with ARC (Audio Return Channel) and
enable the HDMI control function of the TV.
0 When "HDMI Control" is set to "On", the "ARC" settings automatically switch "On".
(v p. 78)
NOTE
0 If the "ARC" settings have been changed, always reset the power to connected
devices after the change.
Front panel Display
Playback Settings

TV Audio Switching

Sets automatic switching to the "TV Audio" input when a TV connected via
HDMI sends an appropriate CEC control command to this unit.
On
(Default):
Off:
0 "TV Audio Switching" can be set when "HDMI Control" is set to "On". (v p. 78)
79
Rear panel
Tips
Select the "TV Audio" input automatically
when receiving a command from the TV.
Do not select the "TV Audio" input
automatically when receiving a command
from the TV.
Remote Index
Appendix