Table of Contents
Advertisement
Accessories
Warning: DO NOT install accessories on an AGILITY while the individual is in the wheelchair.
Headrests
Warning: If a headrest is necessary, follow the headrest manufacturer's instructions and safety information.
Note: Before installing another manufacturer's headrest, consult with a clinician or service provider to ensure the headrest is
compatible with your AGILITY.
ROHO AGILITY Lumbar Support Pad
The Lumbar Support Pad provides added support to the lumbar region. (Not included with all models.)
Package contents include hook and loop fastener strips. The hook side of the fastener strip is pre-attached to the back of the Lumbar
Support Pad.
To Install a Lumbar Support Pad:
Detach the cover flap closest to the zipper and unzip the cover.
1. Place the lumbar support inside the cover positioned at the curve of the spine, or where it is most comfortable.
Notes: The Lumbar Support may be placed either in front of or in back of the foam pad.
Placement behind the foam pad is recommended for models with the air insert.
Placement in front of the air insert may reduce the performance of the air insert.
2. Remove the backing from the loop side of the fastener strip and secure the lumbar support pad in the desired position.
Note: If the loop fastener strip is attached to the inside of the cover, the fastener strip may need to be replaced after multiple cover
washings.
3. Zip the cover closed and re-attach the cover flap.
To Remove a Lumbar Support Pad:
1. Detach the cover flap closest to the zipper and unzip the cover.
2. Carefully detach the hook and loop fastener strips from each other.
ROHO AGILITY Laterals
Warning: AGILITY Max Contour is NOT intended to be used with any laterals.
Note: Only ROHO AGILITY Laterals should be used with ROHO AGILITY Back Systems. Laterals are intended to be used only with ROHO
AGILITY Minimum Contour Back System and ROHO AGILITY Mid Contour Back System. Refer to the product information provided with the
product.
Troubleshooting
For additional assistance, contact your equipment provider, distributor, or Customer Support.
The air insert is not
Confirm that the inflation valve(s) are completely closed (turn clockwise). Inspect for inflation valve and hose
holding air.
damage. Look for holes in the cushion. If very small holes or no holes are visible, follow the instructions in the
Repair Kit provided with your product.
The air insert does not
Add or remove air to adjust to your comfort level. (See C
feel comfortable.
air cells are facing the front of the wheelchair and the cover is properly positioned (see C
i
nsTAllATion
The air insert slides
Make sure it is properly positioned and the fabric back is secured to the fastener strip in the cutout area of
inside the cover.
the foam pad (see C
foam layers around the edge of the cutout area.
Limited Warranty
Limited Warranty Term, from the date the product was originally purchased: Back Shell: 60 months; Cover, Foam Pad, Foam Insert, Lumbar
Support Pad and Air Insert: 18 months. See also the Limited Warranty supplement provided with your product, or contact Customer Support.
ROHO AGILITY Back System Operation Manual
and C
C
i
over
omponenTs
nsTAllATion
C
i
over
omponenTs
nsTAllATion
9
C
- A
over
omponenTs
).
). The perimeter of the air insert should be tucked in between the
i
A
). Make sure
ir
nserT
djusTmenT
r
over
emovAl And
Advertisement
Table of Contents
