TP-Link archer c20 Quick Installation Manual

Quick

Installation Guide

AC750 Wireless Dual Band Router
20
1. Connect the Hardware
1 Power off the modem,
and remove the backup
battery if any.
LAN
Power Off
INTERNET
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router's Internet port.

2. Configure the Router

Method 1 Via Web Browser
1
Connect your computer to the router (Wired or Wireless).
Wired
2
Open a web browser on the computer and configure the router according to the following main clues.
a
Enter http://tplinkwifi.net in the address bar.
Alternatively, enter http://192.168.0.1 or
http://192.168.1.1.
http://tplinkwifi.net
c
Choose the frequency you prefer and then click Next.
Quick Setup-Wireless Dual Band Selection
2.4GHz
5GHz
Back
2 Connect the modem to the
Internet port on your router with
an Ethernet cable.
INTERNET
Ethernet cable
Type in admin for both the user name and password
and click Login.
Note: If the login window does not appear, please refer to FAQ->Q1.
Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved.
d
Verify or change the wireless network settings, and click Next.
Note: You may customize your 2.4GHz/5GHz wireless network name
and password. Once done, the wireless connection will disconnect
automatically, and you must then use the new wireless network
name/password to regain access to the Internet.
2.4GHz & 5GHz Wireless Network Name and Password
Wireless Network Name:
Next
Modem
Typical Connection
3 Power on the modem,
wait for 2 minutes and
then power on the router.
Power On
INTERNET
Wireless
Connect wirelessly by using
the default network name
Or
(SSID) and password printed
on the product label at the
bottom of the router.
admin
admin
Login
TP-LINK_XXXX / TP-LINK_XXXX_5G
Region:
Security:
Password:
XXXXXXXX
Back Next
INTERNET
4 Check the following LEDs to
ensure the hardware connection
is correct.
Power
On
Power On
Model: C20
Power: 12V 1A
Default Access： http://tplinkwifi.net
FCC ID:TE7C20 IC:8853A-C20
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
b
Select your WAN Connection Type, or click Auto-Detect if you
are unsure what your connection type is. Click Next and follow
the instructions to continue.
Note: If an Internet connection is already established, the Quick Setup
c
b
wizard will bypass Step and go to Step
Quick Setup-WAN Connection Type
Auto-Detect
Dynamic IP (Most Common Cases)
Static IP
PPPoE/Russian PPPoE
L2TP/Russian L2TP
PPTP/Russian PPTP
Back
e
Click Finish to complete the setup.
Quick Setup-Finish
Congratulations!
Back Finish
2.4G 5G Internet
On
On On
AC750 Wireless Dual Band Router
Serial
Number
C20 1.0
MAC
Address
5734
Wireless
Password
/PIN
SSID:TP-LINK_XXXX
SSID
SSID:TP-LINK_XXXX_5G
.
Next
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !