Page 1
K&F VIDA L Sub Adapter Version 1.4 User's Manual Released: 24.04.2017 Translation of the original instructions Important Information, Please Read Before Use! KLING & FREITAG GmbH Junkersstraße 14 D-30179 Hannover TEL +49 (0) 511 96 99 70 FAX +49 (0) 511 67 37 94...
User's Manual K&F VIDA L Sub Adapter Table of contents Introduction Icons Used About this Manual Product Description Items Included Components Identification plate Label Intended Use Safety Instructions General Safety Instructions Safety Instructions When Mounting the System as a Stand...
Thank you for purchasing a KLING & FREITAG product. To guarantee trouble-free operation and enable the KLING & FREITAG VIDA L speaker system to achieve its full potential, please read these user's manual carefully before use. This item is a quality accessory for the VIDA L speaker system.
K&F VIDA L Sub Adapter Product Description Using the VIDA L sub adapter, you can establish a robust and safe connection between a K&F subwoofer and a VIDA L speaker. It allows for orienting the speaker on the woofer without affecting the overall appearance.
Identification plate Manufacturer address Printed safety information: Only for use with specified K&F subwoofers and VIDA L or VIDA L + VIDA C! Be sure to read the user's manual before use. Important Safety Instructions: Make sure your VIDA L / K&F subwoofer configuration cannot fall over even if the angle of slant exceeds 15 degrees.
Be sure to use the VIDA L sub adapter only in combination with the subwoofer models listed in these user's manual as a stand for either a VIDA L speaker or a VIDA L speaker with mounted VIDA C only.
Align the subwoofer vertically to the VIDA L speaker. Be sure to mount no more than one VIDA L with a VIDA C speaker on a sub adapter. The 2 mounting bores in the sub- adapter base plate are designed for...
Page 9
Make sure the mounting plate is properly aligned. The mounting- plate front edge must be level with the front edge of the VIDA L speaker. Make sure all four connecting tabs slide smoothly into the corresponding speaker openings.
Page 10
On both sides of the speaker, make sure that the chamfers of the 4 connecting pins sit flush with the outside surface. Put the VIDA L speaker onto the woofer. When doing so, make sure that the guide bolt moves into the base- plate guide.
Dismounting the speaker system requires two persons or a suitable lift for carrying and handling. If you intend to use a lift for uninstalling the speaker, be sure to mount a VIDA L flying frame or VIDA L flying bracket onto the speaker.
Make sure that the system is adequately ventilated during longer storage periods so any residual moisture can escape from the equipment. In addition, protect all system parts and VIDA L accessories from mechanical strains in order to prevent damage. Care and Maintenance For the owner and user, it is mandatory to be aware that speaker accessories used to fly or mount the speakers are fundamentally safety-relevant.