Return To The Initial Settings; Time Setting - Schulte Heizstab 5 User Manual

Return to the initial
settings
You can carry out a general reset to return
to the factory settings:
• the installer settings (grayed out on the
start up menus),
• the time and day,
• set-point temperatures,
• default program.
Turn the dial off, then press the left-hand but-
ton for 10 seconds until "init" is displayed.
Press OK to confirm or C to cancel.
10 sec.
Return to the shutdown mode display.

Time Setting

Wochentag
Stunden
Turn the knob to . The days flash. Press + or
– to make your choice, OK to confirm it and
go to the next setting. Repeat the operations
to set the hours and minutes.
Turn the dial to exit the setting mode.
Minuten
51