Installation Table Of Contents - EZ-ACCESS Pathway Modular Gate Assembly Manual

INTRODUCTION
®
The Pathway 3G Modular Gate is universal and can be installed on a Pathway 3G Modular Ramp system or
at the top of a Pathway Stair System. Hinge can be installed on left or right. Before starting installation,
determine which side of the ramp or stair the hinge should be on and which direction the gate should swing
based on the specific installation and the end user's desired placement.
ATTENTION INSTALLER AND END USER:
•
For residential use only
•
WARNING! THE PATHWAY 3G MODULAR GATE IS NOT DESIGNED TO BEAR WEIGHT. NEVER
HANG WEIGHT, OF ANY KIND, ON GATE, DAMAGE AND POSSIBLE INJURY COULD RESULT.
•
Read and follow all labels, instructions, and warnings prior to assembly and use. For copies of complete
instructions, warnings, or for additional care, use, or safety information, call customer service at 1-800-
451-1903.
•
Leave this ASSEMBLY MANUAL with the end user
•
Do not use product until the installation is complete.
TOOLS TYPICALLY REQUIRED:
✓
Rubber mallet
1/8" drill bit
✓
✓ 5/16" drill bit
✓ 1/4" nut driver
WARNINGS
•
Use caution at all times. Proper maintenance and upkeep to the system components is vital. NOTE: The term
"system" refers to the entire Pathway access system, including, but no limited to, gate, stairs, ramp, platform,
risers, handrails, supports, transition plates, landing pad, and any/all hardware and components.
•
Regularly check that all parts are in good condition and check the system for damage. Ensure all fasteners and
locking mechanisms are in place and tightened. If any part of the system is damaged, loose, or missing; DO
NOT USE until repairs can be made by a certified installer or other qualified person.
•
Do not use product for anything other than its intended purpose.
•
Never play on or near the product.
•
Inspect product for damaged or missing parts before each use. Never use a damaged or unstable product.
•
Observe and avoid all pinch points.
•
Do not tamper with or attempt to modify system components.
•
Do not attach planters, lights, adornments, decorations, clothing, fabrics, or other ornamentals or furnishings.
•
If user has a mobility concern, or otherwise has a weakened condition, use system only with a qualified helper.
•
Metal conducts electricity. Do not use near exposed wiring or hang lights from system components.
•
Only use components supplied or approved by manufacturer with system.
•
Do not sit, stand, or climb on guards, handrails, or gates.

INSTALLATION TABLE OF CONTENTS

o
Installing Gate on A Pathway Modular Ramp
o
Installing Gate on A Pathway Stair System
o
Connecting A Stair Post To A Platform Post
✓
T-Handle Allen Wrench or similar tool
2 each 7/16" wrench, socket wrench, or adjustable wrench
✓
✓
Pencil or similar marker
- 2 -
Page 4
Page 6
Page 9