Table of Contents
Advertisement
Getting started
Installation options
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop posi-
tion, make sure that you first unplug the power adapter and telephone line
cord from the wall outlets before you begin.
1. Slide the telephone base upwards, then pull the
telephone base away from the wall off of the
mounting studs.
3. Plug the telephone line cord into the telephone base
and telephone wall jack, then plug the power adapter
plug into the telephone base and to an electrical wall
outlet not controlled by a wall switch (page xx).
2. Remove the telephone line cord and
power adapter plug from the tel-
ephone base.
8
Advertisement
Table of Contents
