Table of Contents
Advertisement
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Yasushi Fukaya for
the compilation of the technical file and declare under
our sole responsibility that the product(s); Designation:
Brushcutter & String Trimmer Attachment / String
Trimmer Attachment. Designation of Type(s):
EM404MP / EM406MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN ISO 11806-1:2011, EN 50636-2-91:2014.
Place and date of declaration: Kortenberg, Belgium.
30.6.2017
Responsible person: Yasushi Fukaya, Director -
Makita Europe N.V.
SAFETY WARNINGS
Brushcutter safety warnings
WARNING:
Read all safety warnings,
instructions, illustrations and specifications pro-
vided with this machine. Failure to follow all instruc-
tions listed below may result in fire and/or serious
injury to the operator and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "brushcutter" and "machine" in the warnings
and precautions refer to the combination of the attach-
ment and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
General safety
1.
First-time or inexperienced operator should
ask the dealer for training in all operation of
the machine. Never allow children, persons
with reduced physical, sensory or mental
capabilities or lack of experience and knowl-
edge or people unfamiliar with the instructions
to use the machine.
It is recommended only to lend the machine
2.
to people who have proven to be experienced.
Always hand over the instruction manual.
Stay alert, watch what you are doing and use
3.
common sense when operating the machine.
Do not use the machine while you are tired,
ill, or under the influence of drugs, alcohol or
medication. A moment of inattention while oper-
ating the machine may result in serious personal
injury.
Avoid using the machine in bad weather
4.
conditions especially when there is a risk of
lightning.
Follow your national and local regulation for
5.
use of outdoor power machines.
Intended use of machine
This machine is only intended for cutting grass,
weeds, bushes and undergrowth. Never use the
machine for any other purpose such as edging or
hedge cutting. Use for unintended purpose may result
in serious injury.
Personal protective equipment
Always wear heavy, long pants, sturdy boots,
1.
gloves, and a long-sleeve shirt. Do not wear
loose clothing, jewelry, short pants, sandals,
or go barefoot. Secure hair so it is above
shoulder level.
2.
Always wear a helmet where there is a risk of
falling objects.
Always wear protective goggles to protect
3.
your eyes from injury when using the machine.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
4.
Wear ear protection, such as ear muffs.
Exposure to noise can cause hearing loss.
Always wear sturdy shoes with a non-slip
5.
sole. This protects your feet against injuries and
ensures a good footing.
Wear a dust mask as necessary.
6.
Preparation before use
Before use, always check the machine is safe
1.
for operation:
—
Check for fuel leaks.
—
Make sure all fasteners are in place and
secure.
—
Replace damaged parts.
Make sure the cutting tool is properly
—
installed and securely fastened.
12 ENGLISH
Hide quick links:
Advertisement
Table of Contents
