Wolf CW24 Service Manual page 12

Cup Warming Drawer (CW24)
Cup Warming Drawer (CW24)
Tray and Front Cover Removal
To remove the tray and front cover as seperate parts,
first remove the tray and front cover as an assembly
from the cup warming drawer, then:
1. Use a T-20 to extract the six screws going into the
drawer back and the left and right bracket (See
Figure 3-7).
2. Remove the drawer back.
3. Use a T-20 to extract the four screws attaching the
front cover to the bottom of the tray (See Figure 3-
8).
4. Use a T-20 to extract the four screws attaching the
front of the tray to the front cover (See Figure 3-9).
5. Seperate the front cover and tray.
Figure 3-7. Screws Drawer Back to Front Cover
Figure 3-8. Screws Front Cover to Tray Bottom
Figure 3-9. Screws Tray Front to Front Cover
3-5
#9001337 - Revision A - September, 2015
Component Removal