Wolf 30BAK-SPLH/DF Installation Instructions

W W
O L F A R M I N G
I
N S T A L L A T I O N

Warming Rack Model Numbers

• 30BAK-SPLH/DF (804475) – 30" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 36BAK-SPLH/DF (804476) – 36" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 42BAK-SPLH/DF (804477) – 42" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 48BAK-SPLH/DF (804478) – 48" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 54BAK-SPLH/DF (804479) – 54" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 60BAK-SPLH/DF (804480) – 60" X
38" BACKSPLASH WITH 2 WARMING
RACKS
• 66BAK-SPLH/DF (804481) – 66" X
38" BACKSPLASH WITH 2 WARMING
RACKS
NOTE: The total height of the back-
splash with warming racks is 38".
Your Wolf backsplash with warming
racks is designed to be installed
under your Wolf Hood and extend
behind your Wolf cooking appliance.
•

Warming Rack Kit Contains

(1) Warming Rack Panel
(1) Backsplash extension
(1) Lower mounting channel
(1) Upper mounting channel
(8) #10 hex head 2" long screws
(10) #6 countersunk flat head
Phillips 1/2" screws
R
A C K
I
N S T R U C T I O N S
Illustration 1

Install Warming Rack Panel

1. Align upper mounting channel with underside of hood. Allow a minimum of
1/8" between the bottom of the hood and top of the upper mounting chan-
nel. Attach mounting channel with (4) #10 hex head screws to wall framing.
Make sure upper mounting channel is level.
2. Align lower mounting channel with upper mounting channel. Allow
12-13/16" from top of the upper mounting channel to the bottom of the
lower mounting channel. Attach lower mounting channel with the remaining
(4) #10 hex head screws to wall framing. Make sure lower mounting channel
is level.
UPPER
MOUNTING CHANNEL
LOWER
MOUNTING CHANNEL
WARMING
RACK PANEL
BACKSPLASH
EXTENSION