1. Manuals
  2. Brands
  3. Formax Manuals
  4. Binding Machine
  5. FD 90
  6. Operator's manual

Formax FD 90 Operator's Manual

Rotary perforator / creaser
Hide thumbs Also See for FD 90:
Table of Contents

Advertisement

Quick Links

Download this manual
FD 90
Rotary Perforator
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
8/2015
OPERATOR MANUAL
FIRST EDITION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FD 90 and is the answer not in the manual?

Questions and answers

Related Manuals for Formax FD 90

Summary of Contents for Formax FD 90

  • Page 1 FD 90 Rotary Perforator MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 OPERATOR MANUAL Toll Free: 1-800-944-4573 FIRST EDITION Local: 503-640-5920 8/2015...
  • Page 2 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SPECIFICATIONS SAFETY PRECAUTIONS DESCRIPTION INSTALLATION AND OPERATION INFEED TABLE ADJUSTMENT OUTFEED TABLE ADJUSTMENT OPERATION REPLACING AND ADJUSTING PERFORATING TOOLS 4 - 5 REMOVING PERFORATING AND/OR CREASING WHEELS REMOVING COVERS SEPARATOR PRESSURE ADJUSTMENT TROUBLESHOOTING MAINTENANCE MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...
  • Page 4 MyBinding.com 5500 NE Moore Court Hillsboro, OR 97124 Toll Free: 1-800-944-4573 Local: 503-640-5920...

  • Page 5: Specifications

    The FD 90 is designed to perforate paper only with specifications noted above. • DO NOT use the FD 90 to perforate metal foil, tin sheets or similar material. • Be sure all covers are in place and secure before operation.

  • Page 6: Description

    DESCRIPTION The FD 90 Electric Rotary Perforator is designed to perforate sheets allowing for easy separation. The friction feeding system can perforate up to 113 sheets per minute, and can create up to 5 parallel perforations in a single pass (two per- forating tools included).

  • Page 7: Installation And Operation

    INSTALLATION AND OPERATION After unpacking the FD 90, place it on a solid surface and slide the infeed table into the machine and secure with enclosed screws. Connect the male part of the cable into the female part of the connector that is located on the inside of the left side cover of the machine.

  • Page 8: Outfeed Table Adjustment

    Outfeed table adjustment Adjust the output table (2) by sliding the table outward, depending on the size of the sheet being processed. For easier stacking of larger sheets attach the bridge (11) and magnetic side guides (10). These facilitate sheet stacking and substantially reduce paper jamming.
  • Page 9 Replacing & Adjusting Perforating Tools or Creasing Wheels (cont.) NOTE: Always put indented cutting tools on the upper shaft (20). Place the tools (21, 27) on the shaft in a mirroring way starting from the center of the shaft. An odd pair of tools must always be oriented according to the half of the adjusted sheet on which that pair of tools is placed.

  • Page 10: Removing Perforating And/Or Creasing Wheels

    Removing Perforating and/or Creasing Wheels To remove the perforating wheels or the creasing wheel, first remove the shaft with the blade guides then remove the shaft with the perforating wheels. Remove the shaft by holding the bearing (29) and pulling it over the spring into the terminal position. Then push the whole shaft back including the bearing, and remove the shaft from the machine as shown below.
  • Page 11 TROUBLESHOOTING The machine won’t start but the red LED Be sure the upper cover (5) is closed properly and that the optical sensor on is on: the input feeding table operates properly (1). Paper gets crumpled inside the machine: Open the upper cover (5) and remove the paper from the machine. Be sure the feed roller turns freely and that it remains in the proper position, (Figure A, pg 5).

Table of Contents