Download Print this page

Fenwal 35-63 Series Manual page 4

24 vac microprocessor based intermittent pilot ignition control

Advertisement

CONTROL CONFIGURATION
Options
1 = Recycle after Loss of Flame
5 = Re-ignition after Loss of Flame
9 = Special OEM Configuration
Enclosure Configurations
and Wiring Options
0 = Noryl Gray Enclosure
1 = Integral Standoffs
2 = Board Only
DIMENSIONS
Figure 5:
Uncovered
with standoffs
Figure 6:
With cover
®
Page 4
Series 35-63, 24 VAC Intermittent Pilot Ignition Control
X X X
35 - 63 0
FENWAL
400 MAIN STREET, ASHLAND, MA 01721
TEL: (508) 881-2000
FAX: (508) 881-6729
www.fenwalcontrols.com
Printed in U.S.A.
TAG
© 2005 Fenwal
- X X X
Inter-Purge
Time
0 = None (Single Try
Pre-Purge
Time
1 = 15 seconds
0 = None
2 = 30 seconds
1 = 15 seconds
3 = 45 seconds
2 = 30 seconds
4 = 4 minutes
3 = 45 seconds
4 = 4 minutes
Number of Ignition Trials,
Flame Sense Method and Lock Out Reset Method
0 = Single Try, Local Sense
1 = Single Try, Remote Sense
2 = Single Try, Local Sense
3 = Single Try, Remote Sense
5 = Three Tries, Local Sense
6 = Three Tries, Remote Sense
7 = Three Tries, Local Sense
8 = Three Tries, Remote Sense
These instructions do not purport to cover all the details or variations in the equipment
described, nor do they provide for every possible contingency to be met in connection with
installation, operation and maintenance. All specifications subject to change without notice.
Should further information be desired or should particular problems arise which are not covered
sufficiently for the purchaser's purposes, the matter should be referred to KIDDE-FENWAL,
Inc., Ashland, Massachusetts.
P/N 35.63.01
www.fenwalcontrols.com
Trial for Ignition
Time (TFI)
1 = 15 seconds
3 = 30 seconds
5 = 60 seconds
7 = 90 seconds
Models Only)
Thermostat / power off reset
Thermostat / power off reset
Automatic Reset
Automatic Reset
Thermostat / power off reset
Thermostat / power off reset
Automatic Reset
Automatic Reset
1-800-FENWAL-1
3/21/05

Advertisement

loading