Use And Storage Of The Manual - ABB CMS-660 User Manual

4 CMS-660 SYSTEM CIRCUIT MONITORING SYSTEM (CMS)
—

Use and Storage of the Manual

This manual contains all of the safety information, the technical
aspects and the operating necessary to ensure the correct use of
the device and maintain it in safe conditions.
—
Storing
The manual must be stored close to the device; safe from liquids and anything else which may
compromise its leggibility. The manual and the declaration of conformity are both an integral part
of the device until it is dismantled. If the manual is lost or illegible please request a copy from the
manufacturer.
Copyright
The copyright of this manual is the property of ABB Ltd. This manual contains texts, designs and
illustrations of a technical nature which must not be disclosed or transmitted to third parties, even
partially, without the written authorisation of ABB Ltd.
Liability disclaimer
The information contained in this document is subject to change without notice and cannot be
considered as an obligation by ABB Ltd. ABB Ltd. is not liable for any errors that may appear in this
document. ABB Ltd. is not liable under any circumstances for any direct, indirect, special, incidental
or consequential damage of any kind that may arise from using this document. ABB Ltd. is also not
liable for incidental or consequential damage that may arise from using the software or hardware
mentioned in this document.
Brand
ABB Ltd. is a registered trademark of ABB Group. All other brands or product names mentioned
in this document are trademarks or registered trademarks of their respective owners.
Meaning of symbols
Warning – can result in death or
serious personal injury
CE conformity mark
Observe the accompanying
documents
Installation,
electrotechnical expertise
Non-safety related, but useful
and important information
Torque
Disposal
Equipment protected throughout
by reinforced insulation